Screwdriver, XL25
Also called Screwdriver Long XL25, Screwdriver Short XL25
XL25 screwdrivers, long and short, each with a retention pin that slides in through the back and is turned or pushed forward until its tip comes out of the driver tip to hold the screw.
Primary uses
What this instrument is on the table to do.
The short driver places distal locking screws; the long driver places proximal locking screws and the end cap. At removal the long driver takes out the end cap and locking screws. Shafts with a 12 mm hex quick coupling let a power tool start the screw, but the final turns are by hand.
Sizes & variants
The lengths, angles and patterns it comes in.
03.045.001 Screwdriver, XL25 (long) with 03.045.002 Retention Pin; 03.045.003 Screwdriver, short, XL25 with 03.045.004 Retention Pin; 03.045.005 / 03.045.006 and 03.045.007 / 03.045.008 quick-coupling shafts (long and short) with their retention pins; 03.045.009 / 03.045.010 sleeves for the low-profile screw.
There is more on this card
The photos, the description, the uses and the sizes are free for everyone. The 3D model, the parts that only come from years at the table, and the testing that gets you ready for the CST are Pro. See what is included
Know this one cold. Then the other 2,881.
You are reading the free half of this card. Pro opens what only comes from years at the table, and turns all 2,882 of them into something you get tested on until you are quick.
- Cautions, inspection checks, how to pass it, and every operation it is laid out for
- Every setup this instrument is laid out on, with photos of each table
- Flashcards that bring it back right before you would forget it
- Practice tests and timed exams over all 259 setups
Cancel anytime · One account, web and apps
Add your photos & notes
Submissions stay private and are reviewed by our team. An accepted photo joins this instrument's gallery with your credit.