Trocar Ø 4.2 mm
- System
- Pro
A 4.2 mm trocar, the inner piece of the three-part trocar assembly with the protection sleeve and 4.2 mm drill sleeve.
Primary uses
What this instrument is on the table to do.
Proximal locking. The assembled trocar, drill sleeve and protection sleeve go through the chosen aiming-arm hole and a stab incision down to bone. The protection sleeve is locked with a quarter turn, then the trocar is removed so the drill bit can pass.
Sizes & variants
The lengths, angles and patterns it comes in.
03.010.070 Trocar Ø 4.2 mm, for No. 03.010.065.
There is more on this card
The photos, the description, the uses and the sizes are free for everyone. The 3D model, the parts that only come from years at the table, and the testing that gets you ready for the CST are Pro. See what is included
Know this one cold. Then the other 2,881.
You are reading the free half of this card. Pro opens what only comes from years at the table, and turns all 2,882 of them into something you get tested on until you are quick.
- Cautions, inspection checks, how to pass it, and every operation it is laid out for
- Every setup this instrument is laid out on, with photos of each table
- Flashcards that bring it back right before you would forget it
- Practice tests and timed exams over all 259 setups
Cancel anytime · One account, web and apps
Add your photos & notes
Submissions stay private and are reviewed by our team. An accepted photo joins this instrument's gallery with your credit.